Benefit for a Pro refinishers
If you decide to switch your refinishing method or teach a new one. You can use the advantage of our product:
- Easy process and application. Easy to learn and understand how to work with our product
- Different types of surfaces to which you can apply: bathtubs, shower trays, sink, soak tubs, clawfoot tub, Jacuzzi, Tile, etc.
- Good adhesion with different surfaces: Cast iron, Acrylic, Porcelain, Ceramic, Concrete, etc.
The biggest difference with other bathtub refinishing solutions:
3 different systems with different working times from newbie to Pro
2 hours working time (beginners)
This system was created especially for beginners who just start work. For the best result and understanding of the product. Enough time to improve mistakes and confident work with no rush.
01
1 hour 30 minutes working time (medium level)
With less working time, you are able to see how important it is. You improve application skills and improve timing from the start to the end of the process.
02
1 hour working time (pro)
The best solution for Pro. You have just 40 minutes for applying the product. This working time gives you the opportunity to do your job for 3 to 4 hours (or less depending on your skill).
You can make 2 or 3 tubs per day
You can make 2 or 3 tubs per day
- You can work with skyscrapers, nursing houses, multifamily building
- Product has an advanced odorless formula and has test results with Zero VOS status
- All equipment for the work suit with one box, and costs around $150-250
03
ArmoGlaze DIY Kit
Odorless process & product
No need a ventilation
Tested product with Zero VOC status.
Tested product with Zero VOC status.
Does not peel off or chip off
No peeling under bath mats with suction cups or if the faucet leaks.
10-15 years
life expectancy
life expectancy
Pour-on application
No lines, drips, or orange peel marks. Smooth, mirror-like surface.
How much does it cost to refinish?
Bathtubs, sinks, clawfoot tub?
How long does it take?
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
Video instruction
Go to video
How to mix product. (ArmoGlaze)
How to do bathtub refinishing
How To Refinish a Shower Base with ArmoGlaze
Post-reglaze care information
- You should allow tub to sit for at least 36 hours at room temperature before using your refinished bathtub.
- Bathtub can be restored to full use, but even after several years the surface may continue to harden for up to 2 weeks. Because of that, do not use any products with coloring effects.
- Treat your refinished bathtub as you would with new items. Never use abrasive cleaners or abrasive pads. You may use baking soda, but not often because it may slightly reduce bathtub gloss.
- Regular cleaning is important to prevent soap scum build-up that will be hard to remove once it hardens, which can mar the beauty of the finish. Same can occur under the bathmat.
- Regularly once a week clean the whole tub, - you should remove any debris from it and use mild soap and water with a soft wash cloth.
Recommended products
